Smelters, refineries and manufacturing buildings form the middle of many important chains. Keeping these stages organised makes both early progression and later factory upgrades much easier.
Separate major processing stages
Keep raw processing, refined materials and manufactured components in recognisable modules. This prevents one crowded area from becoming impossible to expand.
Size production from downstream demand
Determine how much manufactured output is required, then calculate the refining and smelting capacity needed to support it.
Use buffers between stages
Buffers reveal whether the limiting stage is raw processing, refining, manufacturing or logistics.
Higher-tier production
Version 1.1 expanded the higher-tier factory roster with buildings including the Mk3 Smelter, Mk2 Refinery, Mk2 Fabricator, Mk2 Plasma Forge and Mk2/Mk3 Matter Printers. Version 1.1.1 added the Mk2 Manufactory.
Upgrade where it matters
Higher-tier factories can improve output from the same inputs. Upgrade heavily used constrained stages first rather than replacing every lower-tier machine automatically.
Rebalance neighbouring stages
After an upgrade, recalculate upstream supply and downstream consumption. Increased throughput can move the bottleneck immediately.
Keep outputs moving
High-throughput manufacturing needs enough storage and transport to clear finished items. A blocked output makes extra factory capacity worthless.
Blueprint mature modules
Once a processing block is stable, save it for later stations or expansions so proven ratios and connections can be reused.
Map manufacturing by purpose
Treat smelting and refining as linked supply stages, not as self-contained machines. Start from a particular manufactured part and identify which raw materials, intermediate processors and output buffers it requires. Keep shared components visible in the Production Overview so adding another consumer does not silently starve earlier production.
Choose higher tiers based on evidence
The Mk3 Smelter and Mk2 Refinery, Fabricator, Plasma Forge, Matter Printer and Manufactory options expand later production. Check current output and input rates before upgrading, because Version 1.1 changed some recipe efficiencies. A faster machine does not solve a shortage at its receiving buffer or a full output slot.
Manufacturing checks in Version 1.2
A factory can wait when its output cannot accommodate the produced item. When a manufacturing line stops, inspect destination filters and storage dispatch before doubling the upstream machine count. Test any adjusted target rate under normal sustained demand and update its saved blueprint only after the whole chain works.
Updated for Outworld Station 1.2.0.2 using official release notes. Confirm live recipes and rates in the game.
Practical calculation workshop: Smelting and manufacturing input demand
Worked example, not an official game recipe: Assume the active recipe on your save uses two ore units to make one refined part. Your illustrative production target is 180 refined parts/min, and one smelter processes 75 refined parts/min.
Inputs to record in your own save
Example recipe 2 ore to 1 part; 180 parts/min target. Copy the relevant measured rate, recipe ratio, storage limit and transport capacity from the in-game Codex, Calculator or Production Overview before using these figures for a real build.
Step-by-step calculations
- Ore needed for the finished-parts target:
180 × 2 = 360 ore/min. - Smelters needed at 75 parts/min each:
ceil(180 ÷ 75) = 3 smelters.
How to interpret the result: Three smelters could provide 225 parts/min under sufficient input, but a 360 ore/min supply is needed to support 180/min at the assumed recipe ratio.
Putting the numbers into practice
Use the current Codex for the actual conversion ratio and check the tier's displayed capacity. Size every upstream shared producer to the total demand, not to a single machine's maximum.
Sanity check before spending materials
If the smelters produce faster than parts can leave, Version 1.2 may pause new cycles. Make sure the downstream Manufactory or buffer can receive output.
Important distinction: the formula is reusable, but these example quantities are illustrative, not verified Outworld Station building statistics. Recalculate using the values displayed by your exact technology tier and active recipe. Round required machine counts up to whole modules; when a route is slower than production, use the route's measured delivery rate in capacity calculations.
Related Outworld Station guides
Resources & Mining · Power & Energy · All Outworld Station guides



