Understand fuel requirements and organise dependable supply for production systems that depend on it.

Some Alchemy Factory production chains depend on supporting consumables as well as the ingredients shown at the final crafting stage. The useful planning principle is simple: if a device needs a consumable resource to operate, that resource is part of the production chain and deserves the same supply planning as any ingredient.
A device can have its recipe materials available and still fail to run if another required input is missing. When designing a chain, include every recurring operating resource rather than treating it as an occasional maintenance job.
Adding more consuming devices increases demand on the supporting chain. Expand the supply side first when an existing reserve is already falling over time.
A buffer provides both protection and information. A reserve that steadily shrinks shows consumption is higher than replenishment even if no machine has stopped yet. A stable or growing reserve indicates the supporting supply is keeping pace.
Conveyors, pipes and other automation are easiest to diagnose when routes are readable. Avoid sending a basic supporting input through unnecessary crossings and detours if a direct supply route is possible.
When production stops, trace every required input backwards. Do not assume the visible recipe ingredient is responsible. Transport, output capacity or a supporting consumable may be the actual constraint.
When duplicating a production module, duplicate or expand the supporting supply needed to sustain it. Copying only the consumer side can turn a previously stable resource network into the new bottleneck.
Version 1.0 changed some production and consumption quantities, including Linseed Oil values. That demonstrates why exact consumption ratios from Early Access should be rechecked in the current build before using them for large-scale planning.
For the wider production-chain method, use Recipes & Production Chains. For physical routing and scalable modules, use Automation & Factory Layouts. This page focuses on the supporting-resource problem so a stalled factory is not diagnosed by endlessly adding final machines.
Since the 1.0 update removed the heating devices' base heat cost, fuel use is driven by the machines drawing heat. The community v1.1.5024 data expresses this as heat per second. Calculate fuel use with this method: add up the heat per second required by all active machines, multiply by 60 to find heat per minute, then divide by the heat provided by one fuel item.
| Example | Heat draw | Charcoal Powder use |
|---|---|---|
| One Crucible | 4 heat/second | 5 per minute |
| Three Crucibles | 12 heat/second | 15 per minute |
| One Kiln | 15 heat/second | 18.75 per minute |
These examples assume unupgraded machines and Charcoal Powder worth 48 heat per item. Three Crucibles need 12 x 60 = 720 heat per minute; 720 / 48 = 15 Charcoal Powder per minute. A full fuel belt is not automatically enough for every setup: both the fuel's heat value and the belt's item capacity matter.
| Fuel | Base heat per item | Practical role |
|---|---|---|
| Plank | 20 | Simple early fuel and construction material |
| Charcoal Powder | 48 | Often economical while one fuel belt is adequate |
| Coke Powder | 660 | Much more heat per item when belt capacity is the constraint |
Charcoal Powder may be the better choice when the supply cost is the limiting factor, while Coke Powder becomes attractive when the fuel belt itself is saturated. Do not treat higher heat per item as identical to higher profit: making fuel also consumes resources and sometimes heat. Factory Efficiency raises how quickly heated machines work and draw heat; Fuel Efficiency increases each fuel's effective heat value. Recalculate consumption after major upgrades.
Source and status: Worked heat values are taken from the Alchemy Factory community heat and fuel guide and heat-value reference (data labelled v1.1.5024). Source data rechecked against the v1.1.5024 community reference on 11 November 2026; in-game heat-distribution and throughput testing remains outstanding.
Start from the draw of every heated machine, not the furnace's apparent size. At base speed, a Crucible drawing 4 heat per second consumes 240 heat a minute, while an Athanor drawing 32 heat per second consumes 1,920 heat a minute. With Charcoal Powder valued at 48 heat each, that translates to five and forty Charcoal Powder per minute respectively, before upgrades. Two Athanors would need 80 units a minute, exceeding a single base 60-item/min conveyor; either improve Logistics Efficiency, split the fuel route or change fuel density.
| Machine layout | Heat demand | Charcoal Powder/min |
|---|---|---|
| One Crucible | 4 per second | 5 |
| One Athanor | 32 per second | 40 |
| Two Athanors | 64 per second | 80 |
Heat-value and consumption rates are from the v1.1.5024 fuel and heating reference. Verify actual temperature coverage and fuel acceptance in your built layout. A bottleneck can be in the delivery lane even when there is plenty of fuel in storage.
Fuel Efficiency increases the heat supplied by each fuel item; Factory Efficiency increases production speed and the rate heated devices consume heat. If machines run 25% faster but fuel delivery stays fixed, the same heating network may become insufficient. Recalculate your total heat requirement after speed upgrades rather than interpreting a stopped machine as a changed recipe.
Nurseries consume fertilizer nutrients rather than heat. The v1.1.5024 community guide reports one Basic Fertilizer with 144 nutrients and a Maximum Fertility of 12 nutrients per second, so a continuously working Nursery consumes one unit every 12 seconds, or five units per minute. A base Assembler makes 15 Basic Fertilizer a minute and therefore supports about three such Nurseries at that rate. Higher-grade fertilizer changes growth limits as well as nutrients per item; check crop type and output belt speed before assuming every Nursery produces 60 herbs a minute. Nursery reference.
If the limitation is fuel-item delivery, a denser fuel may be preferable to additional belts. If you need heat over distance, consider the Steam Boiler infrastructure after checking its heat use; community research indicates steam is principally a transport and layout choice, not inherently a heat-efficiency saving. If herbs are short, investigate fertilizer rate, crop fertility and harvesting mode rather than changing furnace settings.